Dark Steel Bathroom Wall Mural
Reference: F6842Dark Steel Dark Steel (or black steel) is a type of steel with a dark, matte-like finish. It is a form of low carbon steel that has been treated with a chemical solution to give it a dark, non-reflective finish.. The Dark Steel bathroom Mural is a great way to add a touch of luxury and sophistication to any bathroom. The dark steel finish of these wall murals gives the room an elegant look, while the texture provides a unique and stylish touch.
Why this Product Should Be Used for Decoration
It is a perfect choice for a bathroom mural as it offers a unique, contemporary look whilst being low maintenance. The dark, matte finish is non-reflective and adds a subtle touch of sophistication to any room, while the low carbon steel is highly durable and easy to clean. The steel finish also helps to protect the wall from moisture and other elements, making it a great choice for a long-lasting and stylish bathroom mural.
How to Apply This Product
Applying the dark steel wall mural for bathroom is a relatively easy process. First, the wall needs to be prepared by cleaning it with a damp cloth and a neutral soap. The wallpaper should then be applied with a glue, either directly on the wall or onto the product. The tools required are a roller, a brush, a cutting knife and a measuring tape to correctly measure the size of the wall mural.
Why Buy This Product in Our Online Shop
At our online shop, we offer a range of design that are perfect for adding a touch of luxury and sophistication to any bathroom. Our wall murals are manufactured in matt colours and are made of non-woven wallpaper. They have a grammage of 180 grams per square metre and are highly durable, with a lifespan of 10-15 years. The murals can be easily cleaned with a damp cloth and a little neutral soap, and can also be easily removed by wetting the wallpaper with a sprayer.
Whether you're looking to add a touch of sophistication to your bathroom or simply want a unique, contemporary look, our dark steel wall mural is the perfect choice.
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.