Mauer Blume 3D Mural Wallpaper
Reference: F024Transform Your Living Room with Mauer Blume 3D Mural Wallpaper
Elevate your home decor with this stunning 3D photomural of flowers. The intricate design features superimposed extrusions of white squares and rectangles, creating geometric shapes that add depth to your walls. The flowers stand out through the holes, giving your living room a unique and refreshing ambiance.
A Modern Design with a Touch of Nature
The predominantly white color scheme is accented with a touch of green, adding a natural element to the mural. This top-quality product is easy to install, leaving no bubbles behind, and features a matte finish to prevent reflections from outside light.
Easy to Install and Long-Lasting
Transform your living room with this durable and long-lasting wallpaper. The 3D photo murals are easy to install and make a significant impact on your home decor. Add depth and dimension to your walls with the Mauer Blume 3D Mural Wallpaper today!
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.
the
10/02/2026
at
03:42 h
the
13/11/2025
at
05:44 h
the
11/08/2025
at
20:34 h
the
11/05/2025
at
20:52 h
the
20/02/2025
at
07:27 h
the
19/11/2024
at
02:18 h
the
23/08/2024
at
10:00 h
the
20/05/2024
at
02:24 h
the
09/05/2023
at
09:36 h