Metal and Wood Chipping wall mural
Reference: F6832Get ready to add a touch of old industrial charm to your space with our Metal and Wood Chipping wall mural. The design features metal and wooden plates that give it a rustic feel. It's manufactured in matt colours, making it a perfect fit for any room decor. Made of non-woven wallpaper, it's durable and can last up to 10-15 years. Applying it is easy, and all you need are a roller, brush, and cutter. Clean it with a damp cloth and neutral soap. With a grammage of 180 grams per square metre, it's easy to remove by wetting the product with a sprayer. Our mural is shipped in rolls 50 centimetres wide and has an M2 reaction to fire certification.
Why Use Our Metal and Wood Chipping Wall Mural for Your Decoration
Our Metal and Wood Chipping wallpaper photo is the perfect addition to your home decor. Its old industrial charm will add a unique touch to your interior design. Whether you're looking to create an accent wall or redecorating your entire room, this will enhance the overall aesthetics of your space. Its rustic design will create a welcoming atmosphere that will make you feel at home.
How to Apply Our Metal and Wood Chipping Wall Mural
Applying it is easy. First, clean the wall surface where you'll apply it. Then, apply glue on the wall or on the product. Next, place it carefully on the wall and use a roller to smooth out any bubbles. Use a brush and cutter to trim the excess paper. Voila! Your new mural is ready for you to enjoy.
Why Buy Our Metal and Wood Chipping Wall Mural in Our Online Shop
Our Metal and Wood Chipping wallpaper photo is the perfect addition to your home decor. We offer high-quality products that are both durable and easy to install. Our mural is manufactured in matt colors and made of non-woven wallpaper, making it perfect for any room decor. Plus, it's easy to clean and remove. With our M2 reaction to fire certification, you can feel safe and secure in your home. Trust us to help you create a unique and welcoming space you'll love.
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.