Plants on concrete living room wall mural
Reference: F6886Introducing our stunning Plants on Concrete Living Room Wall Mural! This captivating design combines the beauty of plants and leaves with the raw elegance of concrete, bringing a touch of biophilia to your living space. The graphic portrayal of lush foliage against a concrete wall creates a mesmerizing visual that will transform any room into a tranquil oasis.
Why This Product Should Be Used for Decoration
Our Plants on Concrete Mural Wallpaper for Living Room is the perfect choice for those seeking a unique and inspiring decor. With its harmonious blend of natural elements and industrial charm, this mural effortlessly enhances the aesthetic appeal of any living space. Create an inviting atmosphere filled with the calming presence of nature, and let the vibrant greens of the plants breathe life into your surroundings!
How to Apply This Product
Transforming your living room into a botanical paradise is a breeze with our mural! Simply follow these easy steps: 1. Prepare the wall surface by cleaning it thoroughly. 2. Apply glue to the wall or directly to the wallpaper. 3. Use a roller or brush to evenly spread the glue. 4. Carefully align the mural and smooth out any air bubbles. 5. Trim off any excess with a cutter. Voila! Your living room is now adorned with a captivating botanical masterpiece!
Why Buy This Product in Our Online Shop
When it comes to finding the perfect wall Mural, we stands out from the rest. With our commitment to quality and customer satisfaction, we ensure that every mural is meticulously crafted to perfection. Our attention to detail, exceptional materials, and seamless application process make us the preferred choice for those seeking a truly remarkable living room transformation. Elevate your space with our Plants on Concrete Living Room Wall Mural and experience the enchanting beauty it brings!
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.