Retro Squares Design 70s Wallpaper
Reference: P5967Introducing our stunning 70s pattern wallpaper! This unique design features a captivating combination of squares and patterns in warm brown tones. It's perfect for adding a touch of vintage charm to any space. Our non-woven wallpaper is manufactured using high-quality materials, resulting in a matt finish that adds a sophisticated touch to your walls. Applying this wallpaper is a breeze with just a roller, brush, paintbrush, and cutter. Cleaning is easy too, simply wipe with a damp cloth and a little neutral soap. With a grammage of 180 grams per square metre, this wallpaper is durable and built to last for 10-15 years. When it's time for a change, you can easily remove it by wetting the product with a sprayer. Our 70s retro wallpaper is produced and shipped in rolls that are 50 centimetres wide. Plus, it has an M2 reaction to fire certification for added peace of mind. Transform your space with this timeless wallpaper today!
Why This 70s wallpaper Should Be Used for Decoration
Our 70s retro pattern wall decor is the perfect choice for anyone looking to add a touch of nostalgic charm to their space. With its captivating squares and stylish patterns, it effortlessly creates a visually stunning focal point in any room. The warm brown tones bring a sense of warmth and coziness, making it ideal for creating a welcoming and inviting atmosphere. Elevate your interior design with this unique wallpaper and let your personality shine!
How to Apply This Retro Wall Decor
Applying our 70s wall decor is a simple and straightforward process. Start by preparing the surface and ensuring it is clean and smooth. Apply glue to either the wall or the product itself, then carefully align the wallpaper and press it firmly into place. Use a roller to smooth out any air bubbles or wrinkles, and trim off any excess with a cutter. Remember to take your time and work methodically for the best results. With its square pattern and retro vibes, this wallpaper is sure to transform your space into a stylish haven!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.
the
31/01/2026
at
09:04 h