Bamboo Rods Pattern nature wallpaper
Reference: P6696The image presents a natural and serene bamboo pattern, with vertical rods creating a textured effect. This design brings an organic touch and would suit any space seeking a connection with nature.
The Bamboo Rods Pattern nature wallpaper is a stunning design featuring bamboo, branches, sticks, and a natural, organic texture with vertical lines that add a unique touch to any space. It is manufactured with a satin finish that allows the product not to create reflections with the interior or exterior light but at the same time gives an excellent colour intensity, and also allows you to enjoy the wallpaper without glare. The grammage of 80 microns, built-in adhesive, and durability of about 8-10 years make it a high-quality and long-lasting product. It is resistant, washable, and suitable to be placed on any flat surface. Additionally, it is produced to order, allowing customers to customize the sizes they want. Easy to install, this top-quality wallpaper is the perfect choice for adding a touch of nature to any room!
Why this product should be used for decoration
The Bamboo Rods Pattern nature wallpaper is a unique and visually appealing option for interior decoration. Its natural and organic design brings a sense of tranquility and harmony to any space. The vertical lines and bamboo elements create a stunning visual effect that adds a touch of nature to the room, making it the perfect choice for those who want to bring the outdoors inside!
How to apply this product
Applying the Bamboo Rods Pattern nature wallpaper is a simple process that can be completed by following a few easy steps. Simply measure and cut the wallpaper to fit the desired area, ensuring a precise and accurate fit. Then, peel off the backing and gently apply the wallpaper to the wall, smoothing out any air bubbles as you go. The result is a seamless and beautiful addition to your space that will impress all who see it!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.