Curved Ocean Waves 3d wallpaper
Reference: P10916A captivating arrangement featuring fluid, curved waves in varying shades of blue. The design creates a dynamic visual flow, evoking a sense of movement reminiscent of ocean waves. Ideal for adding a modern touch to any space with its stylish and contemporary aesthetic.
Transform your space with the stunning Curved Ocean Waves 3d wallpaper, featuring elegant waves in mesmerizing shades of blue. This design captures the essence of the sea through beautiful stripes and geometric patterns, creating a tranquil atmosphere in any room. Let the calming waves wash over your walls, bringing serenity and style to your home!
Why this product should be used for decoration
The Curved Ocean Waves 3d wallpaper is not just a decorative element; it's a source of inspiration! Imagine waking up every day to the soothing imagery of ocean waves. This wallpaper adds a refreshing vibe, perfectly enhancing your interiors with its captivating design. It's ideal for bringing a coastal feel to your living room, bedroom, or office, making every space feel like a serene escape!
How to apply this product
Applying the Curved Ocean Waves 3d wallpaper is simple! Use glue to fix it to the wall, employing a roller and brush for a smooth finish. For precise cuts, a cutter will be your best friend. Clean it with a damp cloth and neutral soap to maintain its vibrant look!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.