Stylized Leaf Pattern wallpaper flowery
Reference: P8969This design features a stylized leaf pattern rendered in a playful arrangement. Distinctive leaf shapes are set against abstract backgrounds, merging natural elements with artistic forms. The combination creates a vibrant and contemporary aesthetic, ideal for modern settings.
The Stylized Leaf Pattern wallpaper flowery is a stunning addition to any home decor, featuring a beautiful and intricate design with leaf, leaves, shapes, abstract, and floral elements. The matt colours give it a sophisticated and elegant look, perfect for adding a touch of nature to your space. This non-woven wallpaper is durable and long-lasting, with a grammage of 180 grams per square metre and a lifespan of 10-15 years. Applying this wallpaper is easy with glue, a roller, a brush, and a cutter, and it can be easily cleaned with a damp cloth and neutral soap. Plus, it comes with an M2 reaction to fire certification for added safety. The unique flowery pattern adds a whimsical and charming touch to any room, making it a must-have for home decoration!
Why this product should be used for decoration
The Stylized Leaf Pattern wallpaper flowery is the perfect choice for adding a touch of nature and elegance to your home decor. The stunning design, featuring leaf, leaves, shapes, abstract, and floral elements, creates a unique and stylish look that is sure to impress. Whether you want to add a pop of color to your living room or create a calming atmosphere in your bedroom, this wallpaper is the ideal choice for bringing the beauty of nature indoors!
How to apply this product
Applying the Stylized Leaf Pattern wallpaper flowery is a simple and straightforward process. Start by preparing the wall and the wallpaper, then apply the glue and carefully place the wallpaper, using a roller to smooth out any air bubbles. Finally, use a brush and cutter to trim any excess paper for a perfect fit. The result is a stunning and seamless look that will transform any room!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.