Vertical Striped Surface stripes wallpaper
Reference: P7371The image captures a two-toned vertical striped surface that brings an elegant and minimal aesthetic to an interior space. The alternating shades create a serene yet structured ambiance.
The Vertical Striped Surface stripes wallpaper features a minimal and elegant design with two-tone blue vertical stripes, perfect for adding a touch of sophistication to any interior. The pattern creates a sleek and stylish look, making it an ideal choice for those seeking a modern and contemporary aesthetic. Manufactured in matt colors, this non-woven wallpaper has a grammage of 180 grams per square meter and a durability of 10-15 years. Applying this wallpaper is easy with glue, a roller, a brush, and a cutter. It can be cleaned with a damp cloth and a little neutral soap, offering both convenience and longevity. With an M2 reaction to fire certification, this wallpaper is a safe and stylish choice for any space.
Why this product should be used for decoration
The Vertical Striped Surface stripes wallpaper is the perfect choice for adding a touch of elegance to any interior. The sleek and stylish design, with its two-tone blue vertical stripes, creates a modern and contemporary aesthetic that is sure to elevate any space. Whether used in a living room, bedroom, or office, this wallpaper adds a sophisticated touch that is both timeless and on-trend.
How to apply this product
Applying the Vertical Striped Surface stripes wallpaper is a simple process that requires glue, a roller, a brush, and a cutter. Begin by preparing the wall and then apply the glue before hanging the wallpaper. Smooth out any air bubbles with a brush and trim any excess with a cutter. The result is a stunning and stylish finish that will transform any space.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.